developer, Author at Westchester Tool Rentals

Selecting a Safe Forklift

by developer | Oct 1, 2019 | Forklift

If You Work in an Area Where These Are Present: Then Use This Type of Forklift. Hazard Classification Acceptable Forklift Designations Class I Flammable gases or vapors are or may be present in quantities sufficient for explosion or ignition Division I Condition...

Electrical Terms & Definitions

by developer | Oct 1, 2019 | Electrical

TERMS & DEFINITIONS Electricity – The movement of electrons from a location of a greater number (positive) of electrons to a location of lesser number (negative) of electrons. Positive – A location of the greater number of electrons. Negative...

Electrical for Events

by developer | Sep 30, 2019 | Electrical

TERMS Volts – The common name for measuring the energy level in a circuit or conductor or the rating of the energy required by a device. Amps – The common name for the measurement of the current in a conductor, the amount or current a device requires or...

Cut-Off Saw Starting Tips

by developer | Sep 30, 2019 | Cut-Off Saw

Cold Engine Starting Procedure Toggle the ignition switch to the “ON” position and pull the choke lever out. Lock the throttle in the start position by depressing the trigger (A) and trigger interlock (B) at the same time. Depress and hold throttle lock...

Cut-Off Saw Cutting Tips

by developer | Sep 30, 2019 | Cut-Off Saw

ICS Blount Making your first cut Outline the cut with a permanent marker. Start the saw and after a brief warm-up period, rev and hold the trigger on full throttle. Always use full throttle when cutting. Carefully align the nose of the bar with the cut line, slowly...

« Older Entries

Next Entries »

Selecting a Safe Forklift

Electrical Terms & Definitions

Electrical for Events

Cut-Off Saw Starting Tips

Cut-Off Saw Cutting Tips

Search Resources

Categories